Documentation Library
Qubic System — product manuals and technical documentation.
76 manuals
·
6 categories
Software
Software applications and simulation guides
Hardware
Motion platform hardware manuals
Tutorials
Step-by-step guides and tutorials
Product Cards
Product specification sheets and datasheets
Miscellaneous
Wallpapers and additional resources
3D Prints
3D printable models for motion platforms
How to Check Your Machine's Revision Number?
Please locate the label on your equipment. The revision number is indicated by the red arrow.
Coming soon
Manuals in this category are being prepared and will be available shortly.
Software
Software applications and simulation guides
Hardware
Motion platform hardware manuals
QS-210 R2
Use this user manual if you have revision R2 with Push-Pull Connectors.
QS-210 R1
Use this user manual if you have revision R1.
QS-220 R4
Use this user manual if you have revision R4.
QS-220 R3
Use this user manual if you have revision R3.
QS-220 R2 and older
Use this user manual if you have second revision (R2) of the system or older model
QS-BT1
User manual for QS-BT1.
QS-CH1
User manual for QS-CH1.
QS-CH2
User manual for QS-CH2.
QS-DD-20
User manual for QS-DD-20.
QS-H13
User manual for QS-H13.
QS-Pivot
User manual for QS-Pivot.
QS-S25
User manual for QS-S25.
QS-S35
User manual for QS-S35.
QS-V20
User manual for QS-V20.
Tutorials
Step-by-step guides and tutorials
Section 1
Help and Tutorials
Landing page for the Help and Tutorials section with navigation tips and search guide.
Naming convention
Reference guide for naming conventions — ship motion names, force names, sustained vs. intermittent terminology.
Section 2
Action Center
Lists issues requiring attention: game integration installs, software/firmware updates, and error prompts.
Dashboards
Customizable vehicle dashboard system streaming telemetry-driven displays to USB screens, monitors, or smartphones.
Dashboard Editor
Create, clone, and edit custom QML-based vehicle dashboards using the built-in Dashboard Editor.
DIY Wind Simulator with RPM gauge
Build a DIY wind simulator with RPM gauge using Arduino or STM32 microcontroller boards.
Motion Post-Processing
Apply gain, linearity curves, and curvature offsets to fine-tune platform movement output.
OBD-II Simulator Configuration
Configure the built-in OBD-II simulator streaming virtual vehicle diagnostics to smartphones or tablets.
DIY Tactile Feedback System
Tactile Audio Based Feedback System driving bass shakers via a dedicated sound card.
Section 3
VR HeadWay
VR HeadWay motion compensation — subtracts platform movement from VR headset tracking.
How to check whether VR Headset works in 6DoF
Verify that your VR headset supports 6DoF tracking required for VR HeadWay.
ScreenWay
ScreenWay motion compensation for stationary monitors — adjusts in-game camera to counteract platform movement.
How to configure ScreenWay for EA Sports WRC
Set up ScreenWay motion compensation in EA Sports WRC using a vJoy virtual joystick.
How to configure ScreenWay for WRC Generations
Set up ScreenWay motion compensation in WRC Generations using a vJoy virtual joystick.
Section 4
How to configure UDP proxy/forwarder for Dirt Rally 2.0 and FanaLEDs
UDP proxy/forwarder setup for sharing Dirt Rally 2.0 telemetry between platform manager and FanaLEDs.
How to configure UDP proxy/forwarder for F1 2019 and FanaLab
UDP proxy/forwarder setup for sharing F1 2019 telemetry between platform manager and FanaLab.
How to configure UDP proxy/forwarder for F1 22 and SimHub
UDP proxy/forwarder setup for sharing F1 22-25 telemetry between platform manager and SimHub.
How to configure UDP proxy/forwarder for Forza Motorsport 7 and Dash Panel
UDP proxy/forwarder setup for sharing Forza Motorsport 7 telemetry between platform manager and Dash Panel.
How to configure UDP proxy/forwarder for WRC Generations and SimHub
UDP proxy/forwarder setup for sharing WRC Generations telemetry between platform manager and SimHub.
How to configure UDP proxy/forwarder for Wreckfest 2 and SimHub
UDP proxy/forwarder setup for sharing Wreckfest 2 telemetry between platform manager and SimHub.
How to configure UDP proxy/forwarder for Project Motor Racing and SimHub
UDP proxy/forwarder setup for sharing Project Motor Racing telemetry between platform manager and SimHub.
Section 5
How to configure ForceFeedback in 22 Racing Series
Recommended in-game force feedback settings for the QS-DD-20 steering wheel in 22 Racing Series.
How to use joystick to control the motion platform
Use a joystick or gamepad as a direct input device to control the motion platform.
How to configure X-Plane 11/12 on Linux
Run X-Plane 11/12 on Linux with motion platform support via network telemetry.
How to configure VR-Engage (MAK Technologies)
Integrate MAK Technologies VR-Engage military simulation with the motion platform.
How to configure Gran Turismo 7
Connect Gran Turismo 7 on PlayStation to a PC-controlled motion platform over local network.
How to configure MechWarrior 5 Mercenaries
Configure MechWarrior 5 Mercenaries motion platform support using SpaceMonkeyTP telemetry tool.
How to configure Dakar Desert Rally
Configure Dakar Desert Rally motion platform support using SpaceMonkeyTP telemetry tool.
How to configure iRacing LFE
Capture iRacing Low Frequency Effects audio via VB-CABLE for enhanced motion and bass shaker effects.
Section 6
How to backup all your profiles and quick tunes
Back up and restore all user profiles, quick tunes settings, custom motion scripts, and dashboards.
How to change profile image
Change the tile image of a custom profile by editing the profiles.ini file.
How to create desktop shortcut that launches the game or a profile
Create desktop shortcuts for launching games or activating specific motion profiles.
How to control platform manager from 3rd party software
Control the platform manager from third-party apps using the mosy:// URL protocol.
How to control platform manager from Stream Deck
Use Elgato Stream Deck to control platform manager with dedicated buttons for park, pause, and profiles.
How to monitor motion platform status from 3rd party software
Web API (JSON over HTTP) for third-party monitoring of device status, temperature, and uptime.
How to tune motion platform for (any) flight simulator
Tune roll, pitch, and G-force settings for flight simulators — sustained vs. intermittent modes.
How to tune Vehicle parameters
Tune vehicle-specific parameters: rev limiter, wheel slip, wheelbase, and center of gravity.
How to use Button Box to tune active profile during racing
Assign button box knobs and rotary encoders to adjust quick tunes and switch profiles.
How to use Visual Studio Code to edit motion profiles
Edit motion scripts in Visual Studio Code with IntelliSense and syntax highlighting.
Section 7
ACE Editor and Advanced Tuning
Advanced tuning of motion-cueing parameters, signal filtering, and washout algorithm settings.
Network Dashboard
Monitor multiple motion platforms across a local network from a single supervisor PC.
SDK - ForceSeatMI
ForceSeatMI SDK — add motion platform support to any application by sending telemetry data.
Product Cards
Product specification sheets and datasheets
QS-210
Professional-grade motion simulation for home setups. Compact, lightweight design with ultra-low 8ms latency.
QS-220
Flagship motion system with 0.8G acceleration and 800mm/s velocity. Class-leading performance for sim racing and flight simulation.
QS-BT1
Dual channel direct drive seat belt tensioner. 200N of force per channel for maximum braking and cornering immersion.
QS-CH2
Precise traction loss simulation by moving the entire cockpit. Sub-8ms feedback for Rally, Drift and racing.
QS-H13
High-performance 2DOF seat mover. Ultra-fast lateral and longitudinal G-force feedback directly through the seat.
QS-Pivot
2.5 DOF configuration add-on. Combined with QS-210 or QS-220, delivers up to 80% of 3DOF immersion.
QS-S25
Six degrees of freedom in a modular frame. 1.0G peak acceleration, 54 dB quiet, doorway-friendly kit.
QS-S35
300mm actuator stroke — three times the heave range of competing 6DOF platforms. Built for dedicated sim rooms.
QS-V20
Extended 4DOF motion cockpit with built-in traction loss. 0.89G acceleration for pro racing simulation.
Miscellaneous
Wallpapers and additional resources
3D Prints
3D printable models for motion platforms
Pedal Mount Bracket
Universal mounting bracket for Fanatec and Heusinkveld pedal sets.
QS-220
by QubicSystem
STL
Button Box Enclosure
Compact enclosure for a 12-button box with USB connector cutout.
Universal
by SimRacer42
STL
Cable Guide Clip
Snap-on cable management clip for actuator wiring harness.
QS-210
by QubicSystem
STL